Optika Italy TB-3W Manuel D'instructions page 2

TABLET PC – CONNECTION TO PHOTO PORT
Your Tablet's been set with the Rotation function disabled: this prevents any flipping of the Live View in order to get a continuous and as large as
possible view of your slide also when the Tablet is removed from the holder. To enable this function again is very easy: you can activate the Rotation
by swiping the screen on his bottom right side and selecting Settings + Screen. Anyway, it's not suggested to activate the function when the camera
is in Live View mode as it may give troubles when the camera runs at high resolutions.
1. SCREW THE ADAPTOR TO THE
C-MOUNT THREAD OF THE
CAMERA
ADAPTOR
CAMERA
LOCKING
SCREW
Page 2
2. PLACE THE
MOUNTED ADAPTOR
INTO THE PHOTO PORT AND
LOCK THE SCREW