Publicité
Les langues disponibles
Les langues disponibles
1. DESCRIPTION
- Suitable for 1 to 4 AA batteries, AAA, C, D, 9V Alkaline, Li-ion, Ni-Cd / Ni-MH and recharge via
USB
- Four individual compartments and one 9V batteries.
- Protection against short circuits for batteries Ni-MH and Ni-Cd during charging.
- The LED and LCD screen shows the progress of the load.
(When charging, a flashing battery with "CHG' will be displayed on the LCD screen; When
charging is completed, "OK" will be displayed)
- Automatically detects bad battery (When a battery can't be charged, "BAD" will be indicated on
the LCD screen)
- Protection against overload.
- Automatically recognizes the battery type (no need to select the battery type).
- Automatic shut off after 24 hour, just unplug and plug again to re-use it.
Note: This charger does not charge the 3.6V and 9V lithium batteries
2. OPERATION
Read the instructions carefully before using this device.
- Connect the adapter to the device.
- Plug the adapter into the power outlet.
- Insert the batteries into the charger with the correct polarity.
- Ni-MH batteries have no memory effect. The charger will automatically begin charging.
- Alkaline batteries can be regenerated if they are not fully discharged.
- Do not charge Lithium batteries when using the USB port
- Using a USB adaptor (Not included), connect your mobile phone or other electronic device to the
USB outlet for charging. (Note: USB charging progress will not displayed on the LCD screen)
Publicité
