Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTIONS
ERMAX "AEROMAX" SCREEN
ADAPTABLE ON CBR 125/150/250 R 2011 → ∞
Estimated fitting time : 45 min.
Assembly
- Remove both plastic side covers (2 plastic rivets on each cover).
Idem on left and right sides.
- Unscrew the 4 dashboard's fitting screws. Pull the dashboard towards you so as to unclip. Disconnect
the meter's terminal and remove the dashboard.
Dashboard fitting screw.
- Unscrew the 2 lower screws of the low fairing (right and left).
Lower fitting screw. Idem on right and left sides.
- Pull towards you the low fairing so as to unclip them from the nose fairing, and then remove the plastic
rivets holding the nose fairing on the right and left sides of the fairing.
Low fairing unclipped.
Plastic rivet (L+R).
- Disconnect the indicators. Untighten the ring holding the beam on the right side and unclip the plastic
bracket of the cables.
Publicité
