Publicité
Les langues disponibles
Les langues disponibles
D 2102 / CC308
Warning: Please read this instruction manual carefully before using the instrument and keep it for future use.
A. SAFETY INSTRUCTIONS
1. The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2. Before to use, make sure that the supply voltage corresponds with the voltage marked on the rating label.
3. Do not place any part of this appliance in water or any other liquid.
4. Do not handle the unit or plug with wet hands.
5. When disconnecting the cable, always pull at the plug; do not pull on the cable itself.
6. When using the device, always pull the power cord completely from its housing to prevent overheating.
7. If the cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid an electric shock.
8. Never try to repair it by yourself. It must be repaired by the manufacturer or its service agent or a similarly qualified
person in order to avoid an electric shock.
9. The power cable must be checked regularly to avoid damage. If the power cable is damaged it must be replaced by
a qualified service center to avoid any danger.
10. Always place your device on a dry surface.
11. Do not use outdoors.
12. Do not let the power cord on the edge of a table or work surface, and prevent it comes into contact with hot surfaces.
13. Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
14. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
B. HOW TO USE IT
This product uses the active laser scanning and passive wireless method of combining the sweep can be accurately
identified: eavesdropping devices, telephone eavesdropping, digital eavesdropping, tracking, vehicle eavesdropping,
wireless pinhole cameras, wired cameras, electrical appliances and other sources...
Can effectively prevent eavesdropping, videotaping, fraud, protect personal privacy data and information confidential
1) Recharging battery
When the built-in battery voltage is low, the fourth panel status indicator will keep flashing.
2) Operation
a) Detection of camera lens
-
Turn the power switch, power indicator light (blue light)
-
Click the laser switch, instruments back 6 LED light starts flashing
SPY DEVICE DETECTOR
EN
Publicité
