Hibernating, Suspending Or Logging Off From The Operating System; How To Check Firmware In Admin Mode - iStorage DatAshur PRO2 Manuel D'utilisation

42.
Hibernating, Suspending, or Logging off from the Operating System
Be sure to save and close all the files on your datAshur PRO
operating system.
It is recommended that you lock the datAshur PRO
system.
To lock, simply click the 'Safely Remove Hardware/Eject' icon within your operating system and unplug the datAshur PRO
Attention:

43. How to check Firmware in Admin mode

To check the firmware revision number, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both "3 + 8"
buttons
2. Press the KEY ( ) button once and the following happens;
a. All LED's (RED, GREEN
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d BLUE LED blinks indicating the last digit of the firmware revision number
e. All LED's (RED, GREEN
f. RED, GREEN & BLUE LEDs switch to a solid
For example, if the firmware revision number is '2.3', the
Once the sequence has ended the RED,
LED.
#38
manually before hibernating, suspending, or logging off from your
2
To ensure your data is secure, be sure to lock your datAshur PRO
computer.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
BLUE LED
GREEN & BLUE LED's will blink together once and then return to Admin mode, a solid
before hibernating, suspending, or logging off from the
2
Solid
BLUE
RED LED will blink twice (2) and the
www.istorage-uk.com
if you are away from your
2
BLUE LED will change to blinking
LEDs
GREEN LED will blink three (3) times.
.
2
GREEN and
BLUE