Archos ARCDisk Mode D'emploi page 4

Installation under Windows ME, 2000, and XP
1 – Connect your ARCDisk to a USB port** of your computer with the included cable.
2 – Your computer will recognize it as a 'Mass Storage Device' and load up its mass storage device drivers automatically if
necessary.
3 – The ARCDisk will appear in your Windows Explorer as another hard drive ARCDisk E: for example.
4 – Drag and Drop files to and from your ARCDisk as any other hard drive.
Installation under Windows 98SE
1 – Download the Win98SE ARCDisk drivers from the Archos web site www.archos.com.
2 – Connect your ARCDisk to a USB port** of your computer with the included cable.
3 – Windows 98SE will detect this new device and automatically start the installation wizard. Follow the on-screen
instructions. Direct Windows to get the drivers from where you saved them to in step 1.
4 – The ARCDisk will appear in your Windows Explorer as another hard drive ARCDisk E: for example.
5 – Drag and Drop files to and from your ARCDisk as any other hard drive.
Mac OS Installation
1 – Connect your ARCDisk to a USB port** of your computer with the included cable.
2 – You computer will recognize it as a 'Mass Storage Device' and mount it. You will see a new hard drive on the Desktop
called ARCDisk.
3 – Attention: if your Mac has USB 1.1 ports, the data transfer speed will be inferior to that of USB 2.0 transfer rates.
4 – Drag and Drop files to and from your ARCDisk as any other hard drive.
4