Salora 32LED8100C Mode D'emploi page 19

Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward
gently. Install two AAA batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.
Connect Power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna/Cable Connection
Connect the "aerial" or "cable TV" plug to AERIAL
INPUT (ANT) socket located on the back of the TV.
Notification
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
"HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC."
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the
product or battery, please consider the collection
systems or facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Specification
TV Broadcasting
Receiving Channels
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption
Weight
TV Dimensions DxLxH
(with foot)
TV Dimensions DxLxH
(without foot)
Display
Operation
temperature and
operation humidity:
English - 17 -
Battery
Products
PAL B/G D/K K
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
1000
On Screen Display
75 Ohm (unbalanced)
220-240V AC, 50Hz.
German+Nicam
2 x 6
65W
6,90
185 x 744 x 494
70 x 744 x 451
16/9 32"inch
5ºC up to 45ºC, 85% humidity
max