Firewire Interface Installation; Cdr-Cdrw Burning; Install The Nero Burning Rom Software (Pc); Using Slim Cdrw With Nero - Archos Slim CDRW Guide D'installation

All manuals and user guides at all-guides.com
Windows ME, Windows 2000, Windows XP:
No install disk is needed.
•
Turn on your computer and wait until it has finished booting.
•
Connect USB end of USB cable to a free USB port on your computer
•
A "New Hardware Found" window will guide you through installation of driver.
Microsoft "USB Mass storage" drivers will be automatically installed.
D. FireWire Interface Installation
Windows 98SE, Windows ME, Windows 2000 & Windows XP:
No install disk is needed.
•
Turn on your computer and wait until it has finished booting.
•
Connect FireWire end of FireWire cable to a free FireWire port on your computer
•
A "New Hardware Found" window will guide you through installation of driver.
Microsoft "USB Mass storage" drivers will be automatically installed.

4. CDR-CDRW burning

A. Install the Nero Burning ROM Software (PC)
NOTE: The SLIM CDRW drive will not operate if the cover is NOT in
the locked position after inserting a CDROM media.
•
Insert the ARCHOS setup CD into the CDROM drive.
•
Close the cover and wait for the CDROM to spin up.
•
Choose Nero installation. If the software installation program does not start
automatically, click Start, click Run, and Browse to the asetup.exe file on the CD.
If you wish to use the CD-RW writer as a floppy drive, you can install InCD Packet Writing
by repeating the instructions above and by choosing the InCD Packet Writing installation.
B. Using Slim CDRW with Nero
In order to use the burning software, please refer to the user's guide available on CD-ROM
in the folder NERO\Nero55\Quickstart\ and choose your language
.
8