Publicité
Les langues disponibles
Les langues disponibles
18. Changing audio soundtrack language (DVD/VCD/CD disc)
It is possible to change the audio soundtrack language to a different language from the
one selected at the initial settings (This operation works only with discs on which multiple
audio soundtrack languages are recorded).
- When playing a disc, press AUDIO button to select desired and available soundtrack or
soundtrack language.
NOTE: When no soundtrack or soundtrack languages are recorded, pressing this button
will not work.
19. Initial settings
Once the initial programming is entered it will be retained in memory until changed, the
player can always be operated under the same conditions.
Common procedure for initial settings
●
Press SETUP button on remote control.
●
Use the navigation buttons to select preferred item, and press OK button, each screen
for setting the value is displayed. Then move the navigation buttons to set the item and
press OK button to confirm the settings.
●
Press SETUP button to close setup menu.
●
Use LEFT or RIGHT navigation button to switch to another main setup item. Then press
RIGHT or OK button to enter submenu page; press LEFT button to return to previous menu page.
1. GENERAL
1.1 TV DISPLAY - It is for selecting TV
output mode.
Options:
a) Normal /PS: Pan & scan mode.
b) Normal/ LB: Letter box mode.
c) Wide: 16:9 wide screen mode.
1.2 OSD LANG - It is used to choose your
desired OSD language.
1.3 Last Memory - Enter another input source (except USB) during DISC playback, and
then back to DVD input source again, this unit will resume playback from the point where
last playback was stopped, if Last Memory is ON.
1.4 Source - It is used to select your input source in DVD mode.
22
Publicité
