How To Operate - Nostalgia Electrics BSET100 Serie Manuel D'utilisation

Machine à petit-déjeuner 3 en un
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HOW TO OPERATE

Before first use, remove all accessories including Coffee Pot, Coffee
Filter, Nonstick Griddle Plate and Trays and wash with clean water to
remove any debris. Dry parts thoroughly and reassemble.
Place the 3-IN-1 BREAKFAST STATION on a stable surface near an
electrical outlet before using to cook or brew coffee.
Always make sure that the cord is away from any water source.
Plug the cord into an electrical socket.
TOASTER OVEN
1.
Place the food to be cooked on the Wire Rack. If food contains oil, grease
or juices, make sure that Oven Tray is in place on Wire Rack first.
2.
Set the Timer to the desired cooking time (0 - 15 minutes)
and turn the Mode Dial to the second setting.
3.
If you are cooking food for less than 10 minutes, first turn the Timer past
the 10 minute mark and then back to the desired cooking time.
4.
A bell will ring to signal the end of the cooking cycle. Make sure Toaster Oven is turned OFF.
5.
When cooking cycle has finished, open the Oven Door and remove the food
from the Wire Rack and/or Oven Tray using an oven mitt or pot holder.
6.
Unplug appliance when finished and let it cool completely.
NONSTICK GRIDDLE
1.
Apply a thin coat of vegetable oil to surface of Nonstick Griddle Plate to protect finish.
2.
Turn Mode Dial to first setting to preheat Nonstick Griddle
Plate for 3 - 5 minutes before cooking.
3.
After Nonstick Griddle Plate has preheated, turn the Mode Knob to the second setting.
4.
Begin to cook breakfast meat, eggs, silver dollar pancakes or desired food
item. Cooking time will vary depending on the items being cooked.
5.
When finished cooking, turn Mode Dial to OFF position
and remove food using a rubber spatula.
6.
NEVER use a metal spatula, fork or other utensil to remove food,
as this could scratch and damage the nonstick coating.
7.
Unplug appliance and allow to cool completely before
cleaning or removing Nonstick Griddle Plate.
COFFEE MAKER
1.
Put desired amount of coffee grounds into Coffee Filter
and place Coffee Filter inside of Filter Basket.
2.
Pour clean, cold water into the Water Tank (5 oz. to 25 oz.).
3.
Make sure that Coffee Pot is on burner.
4.
Close Coffee Maker Lid and flip Coffee Maker Switch to ON position.
5.
While coffee is brewing, DO NOT open Coffee Maker Lid as this could cause scalding.
6.
When coffee has finished brewing, flip Coffee Maker Switch to OFF position.
7

Publicité

Table des Matières
loading

Table des Matières