Start; Setting Temperature; Setting Delayed Start; Setting Sauna Time - Tylo Pure Notice D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4

Start

To start the sauna, press (C). The last temperature setting and operating time will be used. The symbol
will light in the indicator field to show that the heater has started.
To switch off the sauna before the end of the operating time set, press the same button again.

Setting temperature

Use the function selection buttons (F) to select temperature setting. Use the - and + buttons to then
select temperature setting 1-10. The temperature obtained depends on the max. temperature set, i.e.
which program has been set. Temperature can be adjusted whilst taking a sauna if required.
Max. temperature
90 °C
60
194 °F
140
Once the temperature has been set and the heater started, the set temperature will be indicated con-
tinuously and actual temperature will be indicated by a flashing indicator. Once the actual temperature
reaches the set value, the flashing will stop.

Setting delayed start

You can set a time when the heater is to start after a certain time. Use the function selection buttons (F)
to select the timer symbol. Use the – and + buttons to select the number of hours until the heater is to
start (1-10 hours). Activate delayed start by pressing the Start button (C).
The indicator symbol for delayed start will light (field B) and the time delay LED will start to flash. The
flashing indicator will count down and show the actual time remaining until the heater starts. Once the
heater starts, the panel will switch to showing set temperature automatically.

Setting sauna time

Sauna time is set when the heater is OFF. Use the function selection buttons (F) to select operating time
setting. Use the - and + buttons to then select operating time 1-10. Operating time depends on the max.
operating time set, i.e. which program has been set.
24 hour operation is for commercial applications only with attendants on site to routinely check the
sauna.
Version
1
1 h
6 min
24 h
2 h
Set temperature (approx. value, °C)
1
2
3
63
67
145
153
2
3
4
12 min 18 min 24 min 30 min 36 min 42 min 48 min 54 min
4 h
6 h
8 h
4
5
6
70
73
77
158
163
171
LED indicators
5
6
10 h
12 h
7
8
9
80
83
87
176
181
189
7
8
9
14 h
16 h
18 h
10
90
194
10
1 h
24 h

Publicité

Table des Matières
loading

Table des Matières