Kenroy Home FRYE 21010 Guide D'utilisation page 9

Outlet box installation instructions (continued)
3.
Connecting the wires
□ Install the fixture bare copper wire (1) under the green ground screw (FF) on the mounting plate (BB).
□ Connect the fixture bare copper wire (1) to the green (or bare, or green & yellow) supply ground wire (2)
in the outlet box using a wire nut (AA).
□ Connect the white fixture wire (3) to the white (or ribbed) supply wire (4) in the outlet box using a wire
nut (AA).
□ Connect the black fixture wire (5) to the black (or red, or blue) supply wire (6) in the outlet box using a
wire nut (AA).
FF 1
4
4.
Hanging the lamp body
□ Raise the lamp body (A) to wall, align the holes in backplate with the mounting screws ( DD), and then
secure the backplate to the wall with two ball finials (GG).
DD
BB
1
2 6 5
3
AA
Backplate
GG
House wire
black
(or red, or blue)
(HOT)
House wire
white
(NEUTRAL)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Fixture wire
black
(HOT)
Fixture wire
white
(NEUTRAL)
Fixture wire
bare wire
(GROUND)
A
9