Kenroy Home FRYE 21010 Guide D'utilisation page 10

Outlet box installation instructions (continued)
5.
Installing the bulb
□ Swing the swing arm, if the swing arm is hard to swing or have abnormal sound, put a drop of WD-40
or similar product on the joint and let it sit overnight. dry with a soft cloth.
□ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw
away. Do not expose it to children or pets.
□ Install one 120V, 60Hz, 60-watt max. medium-base type A bulb (not included) in to the socket of the
light lamp.
□ Restore power and turn on at switch, your new lamp is now ready for use.
Swing arm
Switch
Bulb
(not included)
10