Elkron DC600S Manuel page 9

Replacing the battery
1. Open the device by undoing the cover fixing screw.
2. Remove the flat battery and press the Tamper switch twice to discharge the device completely.
3. Insert the new CR123A 3V lithium battery in the housing, respecting the correct polarity.
4. Reposition the cover to the base and fasten the cover fixing screw.
Technical specifications
Power: one 3V CR123A lithium battery

Battery life: 6 years (typical value, can vary according to use)

Radio frequency of use: 868,6 - 868,7 MHz

Radio power transmitted: 1,81 dBm

Working temperature range -10°C to +45°C

Dimensions: 85 mm x 30 mm x 20 mm

Weight: 50g

Compliant with EN 50131 Degree 2, ClassⅡ

Hereby, URMET S.p.A. declares that the radio equipment type: WHITE OR BROWN MINI MAGNETIC CONTACT WITH
SHOCK DETECTOR DC600S and DC600S/BR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.elkron.com.
DS80MM1L-001C
SIMPLIFIED EU DECLARATION OF CONFORMITY
ELKRON
Tel. +39 011.3986711 - Fax +39
011.3986703
www.elkron.com
– mail to: info@elkron.it
ELKRON is a trademark of URMET S.p.A.
Via Bologna 188/C – 10154 Turin (TO) Italy
www.urmet.com
9
MADE IN TAIWAN