Home Skinovations Silk'n FaceFX Mode D'emploi page 8

However every cosmetic procedure, including those designed for home use, involve some
degree of risk. Therefore it is important that you understand and accept the risks and
complications that can occur with energy based systems designed for home use.
Silk'n FaceFX treatments are generally very well-tolerated. Most users sense the moderate
heat applied by the device during use, with no further discomfort.
Minor Skin Discomfort
Your skin may become slightly irritated after using Silk'n FaceFX.
This is a typical and transient phenomenon. If the irritation does not disappear within three
days, please consult a physician or a dermatologist.
Skin Redness
Your skin may become slightly red right after using FaceFX. This should disappear a few
hours after treatment.
Protect your Silk'n FaceFX
Store the device in a clean area free of dust.
Do not cover the ventilation slots during use.
Never shake or drop Silk'n FaceFX or subject it to severe shocks.
Silk'n FaceFX is sensitive to environmental temprature during use. Do not expose the
FaceFX to environmental tempratures lower than 10°C / 59°F or higher than 35°C / 95°F
during use.
Silk'n FaceFX can not tolerate extreme change of temperature.
When moved from a cold environment (under 10°C / 50°F) to a warm environment, avoid
use for approximately 3 hours.
Do not expose Silk'n FaceFX to direct sunlight or UV light for long periods of time.
Silk'n FaceFX is designed for occasional home use (as opposed to exhaustive commercial or
professional use). Avoid such exhaustive use.
6