JVC DLA-RS6710 Instructions page 74

Specifications
Product Name
Model Name
Display Panel/Size
Projection Lens
Light-source Lamp
Screen Size
Projection Distance
Input Compatibility Signal
Display Resolution
Input Terminal HDMI Input
Output Terminal Trigger Terminal
3D synchro
Control Terminal RS-232C Terminal
LAN Terminal
Power Requirements
Power Consumption
Operation Environment
Installation Height
Dimensions (Width x Height x Depth)
Mass
Accessories
*1 D-ILA is the abbreviation for Direct drive Image Light Amplifier.
*2 D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 During 3D playback, the pixel is set to 1920 x 1080.
*4 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
74
D-ILA Projector
DLA-RS6710, DLA-RS4910
D-ILA device *1, 2
0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million)
2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus
230 W ultra-high pressure mercury lamp [model no.: PK-L2312U]
Average lifespan: 4000 hours ("Low" mode)
Approx. 60" to 200" (Aspect ratio of 16:9)
Refer to p. 75.
Refer to p. 77.
3840 x 2160 pixels *3
2 system, HDMI 19-pin x 2 (HDCP-compatible) *4
1 system, Ø 3.5 mm DC Power Jack (E)
DC OUT 12 V, 0.1 A
Dedicated terminal for 3D SYNCHRO EMITTER (1 system, mini-DIN
3-pin)
1 system, D-sub 9-pin (male) (external control)
1 system, RJ-45 plug
AC 110 V to 240 V, 50 Hz/60 Hz
360 W (during normal standby: 7 W, during Eco Mode standby: 0.4 W)
Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60°C
Below 5,000 ft (1524 m)
Approx. 455 mm x 179 mm x 472 mm (excluding feet and protrusions)
15.0 kg (Z)
14.7 kg (Y)
Refer to p. 11.