GIA giatsu ROMBO Manuel De L'utilisateur Et D'installation page 53

7.Inquiry the cumulative amount of gas and water
In working statement, @ buttons can inquire about the cumulative water consumption and gas
consumption. Click the @ key to query cumulative amount of using water information, press @
key again can be inquired accumulated gas consumption information . Press the third time for
the @ button or no operation for 20s, can exit the inquiry function.
Note:
●Real-time air consumption show the basic unit of m³/h
●Real-time hot water production show the basic unit of L/min
●Cumulative amount of using water and gas consumption show the basic unit of m³, When the
display numbers reach 999m³,water record is automatically cleared.For example, when the
query information display "Water production 180m³", represents a total cumulative amount of
water heater 180m³.When real-time information shows "volume 8.3m³", it indicates the water
heater cumulative total air consumption 8.3m³.
●Cumulative gas consumption and cumulative amount of water is automatically cleared after
power failure.
●The contents of the query function display only for reference, can not be used for
measurement.
51