OP-10R / OP-10T | Manuel d'installa on et d'u lisa on | Installa on and user manual |
20
4. Use
4.1 Connec ng the Microphone to the
Transmi er
When using the earband microphone instead of
the internal microphone, connect the earband
microphone to the jack MIC INPUT. Thus, the
internal microphone will be deac vated. If re-
quired, cover the microphone cartridge with the
pop shield provided. Put the earband on your
le ear so that the earlobe support will press
against your earlobe from the rear. A clip is pro-
vided to a ach the microphone cable to your
clothes.
4.2 Connec ng the Earphone to the Re-
ceiver
As a padding for the earphone, wrap the foam
cover around it: Put the earphone with its print-
ed side to the rear into the unprinted pocket of