Fagor VISUAL PLUS VPE-061 Manuel D'instructions page 70

ENGLISH
E11: ERROR CC
DESCRIPTION
The CC operates and in 12 minutes, the TC does not rise 3 or more degrees.
CONSEQUENCE
The oven is completely disabled
E12: TEMP. HIGH
DESCRIPTION
The controller NTC reaches 60ºC, but does not exceed 70ºC
CONSEQUENCE
The oven operates normally and the bell is not heard. This message is displayed for 3
seconds every 30 seconds.
E13: VCC ERROR
(Only GAS ovens)
DESCRIPTION
VCC does not respond to the gas control and is at maximum speed.
CONSEQUENCE
The oven is completely disabled
E14: VCC ERROR
(Only GAS ovens)
Description: VCC does not respond to gas control and has stopped.
CONSEQUENCE
The oven is completely disabled
E15: VCC ERROR
(Only GAS ovens)
DESCRIPTION
VCC does not respond to the gas control and the speed is not stable.
CONSEQUENCE
The oven is completely disabled
E16: VCV ERROR
(Only GAS ovens)
DESCRIPTION
VCV does not respond to the gas control and is at maximum speed.
CONSEQUENCE
It is only possible to operate in Convection mode
E17: VCV ERROR
(Only GAS ovens)
DESCRIPTION
VCV does not respond to gas control and has stopped.
CONSEQUENCE
It is only possible to operate in Convection mode
VISUAL PLUS INSTRUCTION MANUAL
70