Frozen Fruit Sorbet Process; Disassembling - Beko SJA 2209 T Mode D'emploi

3 Operation
4. The squeezing process will be completed after
the system turns left and right for about 1.5
minutes. The appliance will give an audible
signal once the process is complete.
WARNING: The Max. mark on
A
the cylinder chamber (4) should
not be exceeded. If you exceed the
Max. mark, the extracted juice will
overflow.
5. Remove the drip stop (13) which is placed on
the juice outlet (12). The mixed juice will pour
into the juice container (8) .
6. Unplug the appliance.
3.6 Frozen fruit sorbet
process
Before
C
cut the fruit you will use (kiwis,
strawberries, bananas etc.) into
small pieces and freeze them.
1. Place the freezing container instead of the
spinning brush (3) when assembling the
appliance.
2. Push the ( ) button (10).
3. Pass and push the fruits you will use through
the feeding chute using the pusher (1).
4. Push the ( ) button (15) once the process is
over.
5. Unplug the appliance.
C
While preparing frozen fruit sorbet,
the ingredients you have processed
will pour out of the pulp outlet (14).
WARNING: Fruits that are taken
A
out of the freezer should be kept
at room temperature for 15-20
minutes.
10 / 72 EN
starting the process:

3.7 Disassembling

• Follow the installation steps in reverse order to
disassemble the appliance.
Slow Juicer / User Manual