Publicité
Les langues disponibles
Les langues disponibles
down to cover bolts, Fig.4.
6.- FITTING THE HANDLEBAR.-
With the Allen Wrench (40) take the 2
Screws (12) and Spring Washers (11)
out of the Handlebar Post (2), Fig.5.
Align the Handlebar (3) with the
bracket on the Handlebar Post (2) and
attach with 2 Spring Washers (11) and
2 Screws (12). Tighten with Allen
Wrench (40), Fig.5.
7.- FITTING THE ELECTRONIC
MONITOR.-
Take the 4 Screws (14) out of the back
of the console. Connect the Mid Sensor
Wire 1 (38) with the Console (1), Fig.6,
I. Then secure the Console (1) on the
Handlebar Post (2) with 4 Screws (14).
Insert the Hand Pulse Wire (9) into the
hole at the Rear of Console (1), Fig.6,
II. Insert the
8.- LEVELLING.-
Once the unit has been placed into its
final position for doing exercise, make
sure that it sits flat on the floor and
that it is level. This can be achieved by
screwing
the
blocks (29) up or down.
9.- MOVEMENT & STORAGE.-
The appliance is equipped with wheels
making it easier to move about. The
two wheels at the front of the
appliance make it easy to store the
machine away, as shown in Fig.7.
MAINS CONNECTION.-
Insert the jack on the transformer (26)
into the connection hole on the main
body and then plug the transformer
into a 220 V mains supply, Fig.6.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
12
adjustable
support
Publicité
