Installation Instructions - exodraft RS Serie Mode D'emploi

28 • UK
Main parts
The RS has the following main components:
a Top section
b Bottom section
c Motor
d Cooling plates
e Vane/ impeller
f Safety hinge
g Safety mesh
h Armoured cable and connecting cable
i Mineral wool mat
j Safety wire
k Location brackets, bolts and nuts

5.2 Installation instructions

Before itting onto a chimney
If ...
the fan is to be mounted onto a
brick chimney ...
the fan is to be mounted onto a
steel chimney ...
RS 009:
RS014/016:
3000112 RS DK DE NO SE UK NL FR 211014
then ...
The chimney must have location brackets – see below.
A lange is required (extra) – see below.
Remove the transportation safety bracket located near
the impeller and check that the impeller can turn freely.
Remove the transport safety bolt on the hinges before
mounting.