Table des Matières
Publicité
© 2009 Nautilus, Inc., All rights reserved
™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include
NAUTILUS®, BOWFLEX®, STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos.
Other trademarks are the property of their respective owners.
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of minimum 64.4" x 95.4" (1.64 m x 2.4 m).
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left
(counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through
the holes.
5. The assembly requires 2 people.
Para obtener este manual en Español Latino Americano vaya a:
http://www.schwinnfitness.com.
Table of Contents
2
3
4
4
5
Before Assembly
2 2 2
Instructions de montage
6
7
21
23
Publicité
Chapitres
Table des Matières
