Publicité
Les langues disponibles
Les langues disponibles
33947
REF.
FEATURES
- Power: 60W
- Speeds: 3 power levels
- Fixed or Oscillating Position
- Security grille
- Diameter of the blades: 40cm
PARTS OF THE FAN
1. Protective grid
2. Helix
3. Tubular base
4. Fixing screw
5. Plastic supports
6. Handle
7. Timer
8. Oscillation switch
9. Power selector
10. Feeder cable
ASSEMBLY INSTRUCTIONS
Coloque la base tubular en una superfície plana, encaje el cuerpo del ventilador en los extremos del tubo,
y utilice los tornillos laterales para jarlo. La base tubular tiene varios plasticos para mejorar su estabilidad.
FAN OPERATION
- Place the fan on a at and dry surface.
- Before connecting the device to the network, make sure that the switch is in the "0" position.
- Plug the power cord into the 220 / 240V - 50Hz AC outlet.
- With the 3-speed system you can turn on the fan. This system is designed to give you the maximum
exibility. You can also activate the oscillation function using the oscillation switch.
POSITION 0: position at OFF, off
POSITION 1: rst speed
POSITION 2: second speed
POSITION 3: third speed
OSCILLATION: oscillation button / xed position
- If you do not use the fan for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the engine.
- If you notice any anomaly (such as unusual fan noise), turn off the device and unplug it immediately.
- Make sure that no objects or liquids enter the inside of the fan through the openings in your box.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
9
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Publicité
