Dab+ Slideshow; Fm Radio Mode; Fm Station Scan; Station List - Albrecht Audio DR 860 Senior Guide D'utilisation

9.4. DAB+ Slideshow

If a station logo or album cover is offered by the current broadcaster, you can enlarge the logo to
full screen by pressing OK. If you press the button again, the display returns to the playback screen

10. FM radio mode

The bar icon in the center of the screen indicates the strength of the FM signal received by the unit.

10.1. FM station scan

The radio automatically performs a full station scan the first time you use it.
If you want to re-scan at a later time (for example, after moving), press and hold the SCAN/TUNE
button or on the remote control

10.2. Station List

After the scan has been completed, you can view all currently available stations using the STATION
LIST or
button.
Navigate through the station list with the rotary knob on the radio or the arrow keys ▲/▼ on the
remote control and confirm your selection with OK.

10.3. manual FM frequency change

Use the ▲/▼ buttons on the remote control to change the FM frequency in 0.05 MHz increments.
Hold down one of the arrow keys to automatically search for the next available station.
Alternatively, you can also control the station search on the radio. Briefly press the SCAN/TUNE
button. Once the frequency is flashing, press OK (knob) to start scanning. The scan automatically
stops at the next available station.
If you would like to set a frequency manually, briefly press the SCAN/TUNE button on the radio,
then the current frequency will start to flash. You can now set a frequency individually by using the
rotary knob.
19