Sony WEGA KDE-W50A11E Mode D'emploi page 38

38
GB
Option Description
PIN Code
Sets a PIN code for the first time, or to change your PIN code.
1 Enter a PIN as follows:
2 Press the number buttons to enter the new PIN code.
3 When requested, press the number buttons to enter
4 Press <.
Tip
PIN code 9999 is always accepted.
Technical
Displays the Technical Set-up menu. Do the following options.
Set-up
1 Press M/m to select the desired option, then press
2 Press M/m to select the "On", then press OK.
CA Module
This option will allow you to access a Pay Per View service once
Set-up you obtain a Conditional Access Module (CAM) and a view card.
See page 40 for the location of the MODEM and
sockets.
If you have previously set a PIN
Press the number buttons to enter your existing PIN.
If you have not set a PIN:
Press the number buttons to enter the factory setting PIN of
9999.
the new PIN again for confirmation.
A message appears to inform you that the new PIN has been
accepted.
OK.
Auto Service Update: Enables the TV to detect and store new
digital services as they become available.
Software Download: Enables the TV to automatically receive
software updates, free through your existing aerial (when
issued). Sony recommends that this option is set to "On" at all
times. If you do not want your software to be updated, set this
option to "Off".
System Information: Displays the current software version and
the signal level. Instead of step 2, press <.
(PCMCIA)