Sony WEGA KDE-W50A11E Mode D'emploi page 19

To
Set a programme to be displayed
automatically on the screen when it starts
– Reminder
Set the time and date of a programme you
want to record – Manual timer REC
Cancel a recording/reminder – Timer list
Do this
1 Press M/m/</, to select the future programme you want to
display.
2 Press OK.
3 Press M/m to select "Reminder".
4 Press OK to automatically display the selected programme
when the programme starts.
A c symbol appears by that programme's information.
Note
If you switch the TV to standby mode, it will automatically turn itself on
when the programme is about to start.
1 Press OK.
2 Press M/m to select "Manual timer REC".
3 Press M/m to select the date, then press ,.
4 Set the start and stop time in the same way as in step 3.
5 Press M/m to select the channel, then press OK to set the TV
and your VCR timers.
A symbol appears by that programme's information. The
indicator on the TV (front) lights up.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
1 Press OK.
2 Press M/m to select "Timer list".
3 Press M/m to select the programme you want to cancel, then
press OK.
A display appears to confirm that you want to cancel the programme.
4 Press , to select "Yes", then press OK to confirm.
19
GB