Electrolux WTGL3VI300 Notice D'utilisation page 73

1
1
3. Remove the polystyrene protection
from the bottom.
2
4. Return the appliance in vertical
position and remove the socket
polystyrene protection.
2
5. Remove the power supply cable and
the drain hose from the hose holders.
6. Remove the three bolts, the hose
holders and plastic spacers by using the
spanner supplied with the appliance.
ENGLISH
It is possible to see water
flowing from the drain
hose. This is due to the
testing with water of the
appliance in factory.
9