Pre-Installation
Turn OFF electrical power to all circuit breakers feeding into the panel before installing or servicing
this product.
Improper use or installation can cause SERIOUS INJURY, DEATH, OR LOSS/DAMAGE OF PROPERTY.
•
This device must be installed by a licensed electrician in accordance with all national and local codes.
•
Read all installation instructions and warnings before beginning install process.
•
Installation instructions may change without notice due to continuous improvements.
•
Do not use product if it is damaged.
•
Fixtures contain no user serviceable parts.
•
Do not connect product to any voltage or frequency supply other than that for which it is rated.
•
Rated for direct insulation contact.
•
If placed in enclosure alongside other electrical components, take necessary precautions regarding
operating temperatures.
•
Product is UL surface mount listed. Does not require dedicated enclosure.
* Contact Ketra for thicker ceiling types.
6 | G2 INSTALLATION GUIDE
P/N 3662343 Rev B
© 2019 Ketra, Inc. All rights reserved.