Télécharger Imprimer la page

Accessories; Important - Hendi Grillsystem 1020 Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

Consult the local regulations, these may differ.
Always store gas bottles upright, even when empty.

Accessories

article number
145791-145791
145821-311097
145111-501122
145616-312940
145814-317570
145623-501177
145839-501344
145197-145197
Using the gas griddle with the included backing tray
Before using the backing tray the first time, use the following instructions:
Remove the griddles and the grease holder. Place the backing tray above the burners.
Sprinkle the braising pan with salt (unwanted substances like water and dirt will be absorbed by the
salt).
Poor a layer of oil in the braising pan and heat the braising pan till the inside smokes and darkens.
Clean the braising pan with a dry cloth. The braising pan is now ready to be used.
Note! Keep the backing tray at all times slightly fat to prevent oxidation.

Important !

When you are using the 1/1 backing tray, you must remove the griddle and the grease holder. When
you don't do this, there will be such an amount of heat inside the appliance that this heat will cause
damage.
Spare parts
article number
145647-322673
152195-302408
145654-330136
153178-306970
145753-302705
145661-302941
Disposal
At the end of its life span, dispose of the appliance in accordance with the then applicable rules and
regulations.
description
Backing tray 1/1
Backing tray 1/2
Leg
Upper grid nickel plated 1/1
Upper grid nickel plated 1/2
Lower grid stainless steel 1/1
Lower grid stainless steel 1/2
Side tray
description
Burner
Thermal safety 220mm
Sparkplug with wire 190mm
Igniter complete with nut
Gas hose 80cm
Gas tap .30

Publicité

loading