Accessing The Connection Compartment - tbs electronics Omnicharge OC12-90 Mode D'emploi

Keep a clear space of at least 10 cm around this product for cooling purposes! Always
mount this product in an upright position. Floormounting is allowed as well, provided that
all 7 screws are used to secure the enclosure.
To reduce the risk of explosion, never use this product in locations where there is danger of
gas- or dust explosions or where ignition protected equipment is mandatory. Never install
the charger directly on top of the battery or vice-versa.
2.3

Accessing the connection compartment

!
CAUTION
WARNING
To access the connection compartment, remove the
two screws indicated on the left and slide the red
connection compartment cover downwards.
Never operate this product without having the cover
re-installed!
7