aldes C.Axpir Initia Notice D'utilisation Et De Maintenance page 36

1. If you cannot loosen the blockage with suction but have located where it
EN
is, you should check if you can easily gain access to the piping without
dismantling any structures or with reasonable dismantling. If you can access
the piping system, remove the blockage by opening the pipe connection.
2. Never try to open a blockage using excess pressure, i.e. compressed air.
Excess pressure will open the pipe connections.
3. You can also try to open the blockage carefully by inserting an
electrician's extension spring into the piping system. Do not push the
connections open.
4. If you are unable to remove the blockage with the instructions provided
above, please contact an authorised Aldes after sales services or a qualified
professional installer.
6.5 Machine information for maintenance
Before contacting the Aldes after sales services, write down the type and
manufacture number of your central unit from the nameplate located on the
outer surface of the central unit, on the side of of the turbine casing. Report
this information to Aldes.
36
Note:
• Always transport the device vertically.
• Do not drop the device.
• Do not expose the device to impacts.