Satco NUVO S13123 Instructions D'installation Et De Service

HI-PRO LED LAMPS 277-480V
Models: S13123, S13124
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fi xture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
• Luminaire wiring and electrical parts may be damaged when drilling for
installation of LED retrofi t. Check for enclosed wiring and components.
• LED Retrofi t installation requires knowledge of luminaires electrical systems.
If not qualifi ed, do not attempt installation. Contact a qualifi ed electrician.
• Install this lamp only in luminaires that have the construction features and dimensions
shown in the photographs and/or drawings and where the input rating of the retrofi t
does not exceed the input rating of the luminaire.
• Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal
or other sharp objects.
• Disable all power to the Luminaire. The lamp holder must be disconnected from
the wiring to the ballast, capacitor, or ignitor. Verify that voltage does not exceed 480V AC.
Please see "Wiring Diagram".
• Failure to follow instructions can result in a damaged product
and will void warranty. It could also result in an electric shock or fi re.
IMPORTANT:
• Added weight of the device may cause instability of a free-standing portable luminaire.
• Installers should not disconnect existing wires from lampholder terminals to make new
connections at lampholder terminals. Instead installers should cut existing lampholder
leads away from the lampholder and make new electrical connections to lampholder
lead wires by employing applicable connectors."
WIRING DIAGRAM:
(L1)
Capacitor
(L1)
© Copyright 2020 Satco Products, Inc. 3/20
Replacing CFL Lamp
CFL Wiring Diagram
Replacing HPS/HID Lamp
Ignitor
HPS/HID Wiring Diagram
(L1)
Hi–Pro Wiring Diagram
Capacitor Ignitor
(L1)
Hi–Pro Wiring Diagram
Satco Products, Inc.
Brentwood, NY 11717