Modem Versions; Standard Version - Adeunis RF ARF169 Mode D'emploi

ARF169 Radio Modems - User guide version V1.4
The ARF169 modem converts data from a serial link into a radio frame for transmission to similar equipment.
ARF169 radio modems are mainly dedicated to point to point and multipoint communications. They use the harmonised European 169.40625-
169.44375MHz, band that is usable without a licence. Their excellent sensitivity coupled with power up to 500mW enable data transmissions
up to 15km to be achieved.
The169MHz frequency band allows the use of :
• 5 communication channels at 2.4kbps :
• 3 communication channels at 9.6kbps
• 1 communication channel at 38.4kbps
The operating parameters of these modems (serial link, radio management, etc) can be updated by commands on the serial link.
The use of the dedicated Adeunis software, "Adeunis RF - Stand Alone Configuration Manager", available from the
enables you to commission your ARF169 modems very easily.

1.1. Modem versions

All products are available in TNC base for remote aerial versions..
Reference
ARF7944BA
Each of the products listed above is supplied in the "standard" version.
The standard version has a protective casing which can be removed to obtain access to the DIN-Rail attachment.

Standard version

with protective casing
Designation
ARF169 ULR - TNC. ANTENNA
Power/RF power
500mW / 27dBm
Standard version
without protective casing
www.adeunis-rf.com website
Page 23 of 40