Xiaomi Mi Drone Mini Mode D'emploi page 8

3. Installing and Disassembling the Propeller Guard
Installing: Line up the protruding points on the propeller guard with the sunken grooves
on the drone and insert them together. Tightly press both sides of the propeller guard
into place after the sunken grooves and protruding points have completely interlocked.
Disassembling: Lightly pull on the clip on one of the ends of the propeller guard outwards
until the propeller guard has separated from the inside of the drone, at which point the
propeller guard can be fully removed.
Alignment of the protruding points of the propeller
guard with the sunken grooves on the propeller guard
7
Sunken grooves on
the propeller guard