Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing and Disassembling
1. Installing and Disassembling the Battery
Installing: Place the battery inside the drone's battery compartment and ensure that the
arrow on the cartridge is pointing in the same direction as the battery release. Press the
battery into place, making sure that both ends are firmly and tightly in place. There will be
a clicking sound as the battery is properly set into place.
Disassembling: Press down on the battery release button until the battery turns upwards.
Remove the battery.
Note: Ensure that you disconnect the device from any power sources and take out the battery
if you are not going to use it for an extended period of time.
Battery Release
5
Publicité
Table des Matières
