Reflecta x9-Scan Guide D'utilisation page 56

(b) Plug the USB mini B of the supplied AC adaptor to
the USB port of the copier, and plug the adaptor to
the power outlet.
Please charge the battery at least 2.5~3 hours
3. Red LED will light on during charging. When the
battery pack is fully charged, the red LED light will be
off and you may disconnect the charging connections.
Status LED:
1. Scanner with Battery type:
Red: The Image Copier is OFF, the battery is charging;
Purple: The Image Copier is ON and the battery is
charging from the AC adapter;
Blue: The Image Copier is turned ON.
1. Scanner without Battery type:
Blue: The Image Copier is ON with USB cable or
adaptor connected.
-10-