Cleaning The Filter; Important - Robot Roomba RVE-Y1 Guide Du Propriétaire

Cleaning the Filter

1
Remove the bin. Remove
the filter by grasping
both ends
and pulling out.
2
Remove debris by
tapping the filter
against your trash
container.
3
Reinsert filter with ridged grips facing out. Place bin back in
the robot.

Important:

The robot will not run if the filter is not installed correctly.
Replace the filter every two months.
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry cloth
3
Wipe the bin door with a clean, dry cloth.
Closed Door
4
Clear any debris from the vacuum path.
Opened Door
Roomba j7+ Owner's Guide
®
EN
7