Troubleshooting - cosori CO137-AF Guide D'utilisation

Masquer les pouces Voir aussi pour CO137-AF:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

TROUBLESHOOTING

Problem
The air fryer will not turn on.
Foods are not completely
cooked.
Foods are cooked unevenly.
Foods are not crispy after air
frying.
French fries are not cooked
correctly.
Baskets will not slide into the
air fryer securely.
White smoke is coming out of
the air fryer.
Dark smoke is coming out of
the air fryer.
The air fryer has a plastic
smell.
If your problem is not listed, please contact Customer Support (see page 18).
16
Make sure the air fryer is plugged in.
Push the baskets securely into the air fryer.
Place smaller batches of food items into the inner basket. If the basket
is overstuffed, then foods will be undercooked.
Increase cooking temperature or time.
Foods that are stacked on top of each other or close to each other
need to be shaken or flipped during cooking (see Shaking Food, page
12).
Spraying or brushing a small amount of oil on foods can increase
crispiness (see Cooking Guide, page 13).
See French Fries, page 14.
Make sure the inner basket is not overfilled with food.
Make sure the inner basket is securely inside the outer basket.
The air fryer may produce some white smoke when you use it for the
first time. This is normal.
Make sure the baskets and the inside of the air fryer are cleaned
properly and not greasy.
Cooking greasy foods will cause oil to leak into the outer basket. This
oil will produce white smoke, and the baskets may be hotter than
usual. This is normal, and should not affect cooking. Handle baskets
with care.
Immediately unplug your air fryer. Dark smoke means that food is
burning or there is a circuit problem. Wait for smoke to clear before
pulling the baskets out. If the cause was not burnt food, contact
Customer Support (page 18).
Any air fryer may have a plastic smell from the manufacturing
process. This is normal. Follow the instructions for a Test Run (page
10) to get rid of the plastic smell. If a plastic smell is still present,
please contact Customer Support (see page 18).
Possible Solution

Publicité

Table des Matières
loading

Table des Matières