DreamGEAR MY ARCADE GO GAMER Manuel De L'utilisateur page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTES:
• Check your television user guide for instruction for inputs.
• The volume bu ons only control the volume of the Go
Gamer. Television volume should be adjusted separately.
Troubleshooting
Issue: My Go Gamer doesn't turn on.
Solution: Make sure that you have new ba eries installed
properly and securely in your Go Gamer.
Issue: The games won't show up on my television screen.
Solution: Make sure of the following:
• The AV cable is not damaged and contacts on both ends are
not damaged or compromised.
• The AV cable is properly and securely plugged into the TV.
• The TV is on the proper input (the input should match the
se ing on where the plugs are plugged into. Refer to your
television's user guide for instruction for inputs).
• The AV cable and the TV ports are ee om dust and debris.
Issue: I have my headphones plugged in but cannot hear
anything.
Solution: Make sure of the following:
• Make sure you are plugged into the AUX OUT port on the
bo om of the Go Gamer.
• Make sure the volume of your Go Gamer and headset is
turned up.
Ba ery information
Leakage of ba ery acid can cause personal injury as well as
damage to your controller. If ba ery leakage occurs,
thoroughly wash the a ected skin and clothes. Keep ba ery
acid away om your eyes and mouth. Leaking ba eries may

Publicité

Table des Matières
loading

Table des Matières