DreamGEAR MY ARCADE GO GAMER Manuel De L'utilisateur page 5

" " to illuminate the device LEDs.
2. The main screen will display.
2. Use the D-pad arrows to select a game.
NOTE: All directions of the D-pad can be used to help select a
game.
4. Press the A bu on to play the game.
5. To return to the main menu to play a new game press and
release the reset bu on.
NOTE: The Go Gamer has an AUX OUT port on the bo om of
the device for use with headsets that have a 3.5mm auxiliary
connector.
Se ing up your Go Gamer with a television
1. With a 2.5mm to AV cable (not included), plug the 2.5mm
end of the cable into the port on the bo om of the Go Gamer
labeled "AV OUT".
2. Locate the audio (white) and video (yellow) inputs on your
television.
3. Plug the video (yellow) side of the AV cable into your
television's video input.
4. Plug the audio (white) side of the AV cable into your
television's audio input.
5. Con rm your video display is set to the proper video input.
For example, if you plug the Go Gamer into your television's
input 2 port, switch your television to the same input 2.
6. Move the switch located on the top of the system om
"OFF" to "ON" to turn on the system or move switch to the
" " to illuminate the device LEDs.
7. The main screen will display on the television.