Table Des Matières - Uline H-3068 Mode D'emploi

The H-3068 is a precision-built tool designed for high speed, high volume stapling. This tool will deliver efficient,
dependable service when used correctly and with care. As with any tool, for best performance the instructions should
be followed. Please study this manual before operating the tool and understand the safety warnings and cautions.
NoTe: Additional safety measures may be required because of your particular application of the tool.
PAGE 2 OF 28
INTRodUcTIoN
TABle of coNTeNTs
Tool Specifications ....................................................................................2
Safety Instructions...................................................................................3-4
Loading the Tool.........................................................................................4
Clearing Tool Jams.....................................................................................5
Troubleshooting...........................................................................................5
Lubrication and Maintenance..............................................................6-7
Replacing Driver Piston..............................................................................8
Replacing Anvil...........................................................................................9
Replacing Driver........................................................................................10
Replacing Pusher or Spring......................................................................11
Parts Diagram.............................................................................................12
Parts List........................................................................................................13
Tool specIfIcATIoNs
Model of Tool
Dimensions: L x H x W
Weight (without Fasteners)
Compressed Air:
Maximum PSI:
Recommended Operating Pressure:
Air Consumption:
Staple Specification:
Staple Capacity:
H-3068
SP50-10B
13.5 x 8.75 x 6
6 lbs
55 psi
36-50 psi
1.5 cbm
S-17851 5/8" Stick
102 staples
0514 IH-3068