Publicité
Les langues disponibles
Les langues disponibles
FIG A: PARTS IDENTIFICATION
See-through lid provides clear view
of extraction progress.
Four retention clamps
secure lid to filter housing.
Lift levers to release.
Dual vacuum hose outlets (2
in. and 2½ in.). Connect hose
from extractor here. Use cap
provided to close off one inlet
when not in use.
OUTLET—ATTACH TO
WARRANTY
Warranty information is available from your dealer or at
www.legendbrandscleaning.com.
Warranty registration
Visit warranty.sapphirescientific.com to register your
purchase. Registration allows us to better assist you with
using, maintaining or servicing your equipment, as well
as to contact you in case we have important safety
information concerning your Sapphire Scientific product.
If you determine service is required, have your
equipment model, serial number and original proof of
purchase available and call your distributor for
assistance with obtaining a return material authorization
(RMA).
WARNING: This product and other substances
that may become airborne from its use contain
chemicals, including lead and phthalates, known to the
State of California to cause cancer, birth defects, or
other reproductive harm. For more information, go to
P65Warnings.ca.gov
13-01674J 68-134S
EXTRACTOR
CONTACT
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950
LegendBrandsCleaning.com
SPECIFICATIONS
Model
Dimensions (H × D × W)
Vacuum hose connections:
Construction
Specifications are subject to change without notice. Some values
may be approximate.
2
Filter cage lifts out for
easy cleaning.
AIR INLET—ATTACH TO
CLEANING TOOL(S)
Dual vacuum hose inlets
(Two 2 in.). Connect hose
from wand or upholstery
tool here. Use cap provided
to close off one inlet when
not in use.
CDV Filter Box
9.5 × 20 × 18 in.
24.1 × 50.8 × 45.7 cm
Inlets: Two 2 in.
Outlet: 2 in. and 2½ in.
Rotomolded polyethylene housing
with integrated handle. Stainless
steel filter box.
Legend Brands, Inc.
Publicité
