Quick Installation Guide; Prepare For Installation - USRobotics USR7500 Guide D'installation

USR7500 USB Print Server

Quick Installation Guide

Package Contents:
• USR7500 USB Print Server
• Installation Guide (this guide)
• 9VDC/12VDC Power supply
• Installation CD-ROM
Product Details
Status LED: If this LED is lighted green, the USB Print Server is idle. If this LED is blinking green,
information is being transmitted and received. If this LED is lighted green and the
Error LED is lighted, there is a hardware error. If this LED is blinking green and the
Error LED is flashing, there is a firmware upgrade in progress.
Error LED: If this LED is lighted red and the Status LED is lighted, there is a hardware error. If this
LED is blinking red and the Status LED is blinking, there is a firmware upgrade in
progress. If this LED is blinking red and the Status LED is lighted, there is not a printer
connected to the USB port.
USB Port: Use this port to connect a USB printer to the USB Print Server.
ENET Port: Use this port to connect the USB Print Server to a router, switch, or other Ethernet
network device.
9VDC/12VDC:Use this port to connect the power supply to the USB Print Server.
Diagnostic: Press and hold this button for two (2) seconds to print out a diagnostic page contain-
ing the USB Print Server settings. To restore the factory default settings and print out
a diagnostic page containing the default setting information, unplug the power sup-
ply of the USB Print Server, press and hold in the diagnostic button, and plug the
power supply back in. Continue to hold in the Diagnostic button for 10 seconds to
restore the factory default settings.
Connecting the USR7500 USB Print Server
Note: For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more
detailed information.

Prepare for installation

Note: Your model number is 7500. You can find your serial number on the bottom label of
the USR7500 USB Print Server and on the side of the package. Write your serial number
down. If you ever need to call our Technical Support department, you will need this number
to receive assistance.
1