Télécharger Imprimer la page

DeWalt TSTAK CONNECT DWST17510 Mode D'emploi page 15

Publicité

Les langues disponibles

Les langues disponibles

When charging a battery pack, a large battery image is displayed in the center of the LCD screen
showing the battery pack charging status.
WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the power
outlet when not in use and when making repairs. Do not attempt to disassemble the unit; take it
to an authorized service center when service or repair is required.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
When the appliance is turned ON
Green Battery icon will be displayed ONLY when the unit is fully
charged
When the unit is powered by battery, the unit will display battery
empty icon for 3 seconds and then turn off automatically
Hot Delay
This charger has a hot delay feature: when the charger detects a
battery that is hot, the red icon is shown and it automatically starts
a delay, suspending charging until the battery has cooled, and the
icon turns blue. After the battery has cooled down, the charger
automatically switches to the pack charging mode. This feature
ensures maximum battery life.
Faulty Battery Packs
This charger will not charge a faulty battery pack. The charger will
indicate faulty battery pack by displaying an X on the LCD battery
image. If this occurs, re-insert the battery pack into the charger. If
the problem persists, try a different battery pack to determine if the
charger is working properly. If the new pack charges correctly, then
the original pack is defective and should be returned to a service
center or other collection site for recycling. If the new battery pack
elicits the same trouble indication as the original, have the charger
and the battery pack tested at an authorized service center.
NOTE: This could also mean a problem with a charger.
EN
EN
15

Publicité

loading

Ce manuel est également adapté pour:

Tstak connect dwst17510-ca