Operating Instructions - Flex PE 8-4 80 Notice D'utilisation

However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ.
This may significantly increase the
exposure level over the total working period.
For a precise estimation of the vibration load
the times should also be considered during
which the power tool is switched off or even
running, but not actually in use.
This may significantly increase the
exposure level over the total working period
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).

Operating instructions

WARNING!
Before carrying out any work on the
polisher, always pull out the mains plug.
Before switching on the power tool
Unpack the polisher and check that there
are no missing or damaged parts.
Attach handle cover
 Loosen screws or handle.
 Push on handle cover (1.).
8
 Tighten screws (2.).
Switching on and off
Brief operation without engaged switch
rocker:
 Push the switch rocker forwards and
hold in position.
 To switch off the power tool, release the
switch rocker.
Continuous operation with engaged
switch rocker:
 Push the switch rocker forwards and
engage by pressing the front end.
 To switch off the power tool, release the
switch rocker by pressing the rear end.
PE 8-4 80