How To Remove: Shelf Supports; How To Use: Pyrolytic Cleaning - Electrolux EOF4P66X Notice D'utilisation

Clean the cavity after each use. Fat accumulation or other residue may cause
fire.
Moisture can condense in the appliance or on the door glass panels. To de‐
crease the condensation, let the appliance work for 10 minutes before cooking.
Do not store the food in the appliance for longer than 20 minutes. Dry the cavity
Everyday Use
with a microfibre cloth after each use.
Clean all accessories after each use and let them dry. Use a microfibre cloth
with warm water and a mild detergent. Do not clean the accessories in a dish‐
washer.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

12.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.

12.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
CARE AND CLEANING
1
2
67/156