Franke KEP AC-SBF Serie Installation page 12

SECTION 3: CONNECTING THE WATER LINE
DRINKING FOUNTAIN
C. CONNECT THE BOTTLE FILLER TUBE
This tube supplies cold water from the cooling tank to the Bottle Filler.
a) First, remove plug from fitting on tank drain.
c) Feed tubing up through the top and attach the top to the cooler. (Figure 1)
02/20 | 2000102863_KEPAC-SBF
¼" OD tube to connect
to Bottle Filler
b) Next, insert end of tube into fitting.
Figure 1
Figure10
12