Cleaning And Maintenance - Klarstein 10031337 Mode D'emploi

Warning: Danger of electric shock
Be sure to unplug the power cord before cleaning and maintenance.
Cleaning
• Use wet cloth to clean fridge' s inside frequently.
• Clean heat dissipation window frequently to ensure good heat dissipation.
Be careful: Do not clean with abrasive materials or hard and shrill toolings.
How to change the fuse
1. Unplug the power cord.
2. Loose the cap of cigarette lighter.
3. Take out the embedded fuse.
4. Change faulty fuse for a new one with correct specification (insert style 32 V 10-15 A)
5. Tighten the cap.
Be careful: Possible malfunction or damage. Rated current for fuse should be within
10-15 A, no less than 10 A and Max. is 15 A. Fuse with rated current more than 15 A
will burn battery fuse in car when fridge uses car battery.
• Fuse with rated current less than 10 A will be easily burnt during compressor starting
procedure.
Steps for changing the light inside
• Steps for changing the light inside unplug the power cord and open cover of the fridge. Pry the light cover
by using screwdriver, dismantle the light fixing board take out the light component and disconnect con-
nector wire.
• Change the faulty light and pull out the light components.
• Insert connector wire and fix the light fixing board.
• Fix light cover.
21

Cleaning and Maintenance

1
2