Samsung TabPro Pen Mode D'emploi page 10

Using the C Pen
Disconnecting or reconnecting devices
If the C Pen and the mobile device are not kept within the Bluetooth connection range (10 m),
the devices will be disconnected. To connect the devices again, bring the devices closer
together and then press the Up button or the Down button on the C Pen.
• I f the Bluetooth feature is deactivated in the mobile device, the devices will be
disconnected. When you activate the Bluetooth feature on the mobile device and
then press the Up button or the Down button, the devices will be connected again.
• I f the Bluetooth connection is lost due to a problem with the connected mobile
device, access the Bluetooth menu on the mobile device to pair the devices again.
Connecting to other devices
After disconnecting the C Pen and the mobile device, you can connect the C Pen to other
devices.
1
Press and hold the Up button and the Down button simultaneously for approximately
five seconds to enter Bluetooth pairing mode.
The C Pen and the mobile device will be disconnected and the C Pen will enter Bluetooth
pairing mode.
2
Connect the C Pen to the other device.
Notices for using Bluetooth
Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to
various devices over short distances. It can connect and exchange data with other Bluetooth
enabled devices, such as mobile devices, computers, printers, and other digital home
appliances, without connecting via cables.
• T o avoid problems when connecting your C Pen to another device, place the devices
close to each other.
• E nsure that your C Pen and the other Bluetooth device are within the Bluetooth
connection range (10 m). The distance may vary depending on the environment the
devices are used in.
English (UK)
10
8